木工机械

开料机主轴控制一般采用一台变频器分时驱动多台主轴电机的方案，工作时，同一时间变频器只需要驱动一台主轴处于运动状态，数控系统根据工艺要求，控制接触器来切换不同主轴运转，变频器领先的主轴控制算法，轻松应对负载瞬时切换要求。

方案特点：

1. 主轴瞬时切换时，换刀时间短，效率高，实现真正的“瞬时换刀”

2. 启动快速，变频器优异的控制算法，实现主轴快递响应，快速启动，爆发力强

3. 稳定可靠，全系列变频器经过全面的EMC测试，保证了设备

1. The main shaft control of the cutting machine generally adopts the scheme that one frequency converter drives multiple main shaft motors in time sharing. When working, the frequency converter only needs to drive one main shaft in motion at the same time. The numerical control system controls the contactor to switch the operation of different main shafts according to the process requirements. The leading main shaft control algorithm of the frequency converter can easily meet the requirements of load instantaneous switching.

2. Program features:

3. When the spindle is switched instantaneously, the tool change time is short and the efficiency is high, realizing the real "instantaneous tool change"

4. Fast start, excellent control algorithm of frequency converter, realizing express response of spindle, fast start and strong explosive force

5. Stable and reliable, the full series of frequency converters have been comprehensively tested by EMC, ensuring the long-term stable operation of the equipment.